How cannot you not fall in love with these warm colored gemstones? The two-tone ring compliments the reds, yellow and oranges beautifully. Plus you will love the lacey vintage details from every angle around this ring.

DETAILS

• 4.62ct Genuine Fire Citrine (11x11mm, AAA Grade)
  
• Genuine Mozambique Garnet Accents
• Measurements: 12mm width
• Material: 10k Yellow and White Gold

This wedding ring was a complete transformation. The original engagement ring's band, prongs and channels were worn down from several years of wear. The marquise diamond was upgraded, the original engagement ring restored and new wedding bands were custom made.

NOTES

The diamonds for the new wedding bands were removed from our client's old rings she no longer wore. After the engagement ring was completely repaired, the new bands were hand made to fit perfectly. It is hard to tell what is original and what is new.

DETAILS

• 14-karat Yellow Gold
• 1.09-carat Marquise Diamond
• 1.75cttw Baguette and Round Diamonds

Sharon had inherited numerous pieces of jewelry over the years and wanted to redesign them together as a fabulous necklace she would enjoy showing off. She also wanted a pair of matching earrings with any remaining diamonds.

DESIGN NOTES

Ambrosia custom designed a journey style pendant and reset all the different sizes of diamonds into. The pendant was a simple, yet classic style. A few extra diamonds were created into matching earrings.

DETAILS

• Material: 14-karat yellow gold
• 1.15-carat marquise diamond
• .55cttw round diamonds
• 14;karat Singapore gold chain
• Measurements: 28.75mm length x 9.14mm width

After several years of marriage, Kris's wedding ring needed a little love and attention. The original wedding ring was repaired and restored to last many years again. Diamonds were removed from an old tennis bracelet and accented to her wedding ring.

DETAILS

• 14-karat white gold
• .46-carat marquise diamond
• .25cttw round diamond accents

This special ring was designed for Jess and Del's wedding anniversary. Topaz is the 4th wedding anniversary gemstone. Rhodolite garnets were added to the ring design as blue, reds and purple were their wedding colors. 

DETAILS

• 6x3mm London, Swiss and Light Blue Topaz
• 3mm Rhodolite Garnets
• .09cttw diamond accents
• Material: 14-karat white gold
• Measurements: 9.2mm taper 2.2mm wide

Darian inherited numerous pieces of family heirlooms and she wanted to use them to custom design her wedding ring. This rose gold wedding ring set adds a unique twist on the traditional marquise diamond. It is a low profile which creates a comfortable setting.

DETAILS

• .33-carat Marquise Diamond
• .60cttw Genuine Diamonds
• Material: 14-karat Rose Gold
• Measurements: 9.85mm wide

This curved diamond wedding band was custom designed to fit perfectly for Olivia's custom engagement ring. The wedding band slid over and wrapped around the engagement ring's curves. The diamonds match the original diamonds and add extra sparkle to the wedding set.

DESIGN NOTES

Ambrosia design the original custom engagement ring and created a matching wedding band to fit perfectly.

DETAILS

• 14-karat White Gold
• .25-carat total weight

Why settle with a boring solitaire engagement ring? This stunning contemporary design ring is sure to turn heads. The princess cut diamond is set at an angle to compliment the open angled outside edges. The diamond is channel set to provide a smooth and comfortable setting; perfect for those who work a lot with their hands.

DETAILS

• Platinum setting
• .50-carat princess cut diamond
• Quality: G-H / SI2

Rose loved her modern wedding ring, but wanted to combine the diamonds she inherited from her mother's ring. The new design was inspired by the original angular shaped wedding ring. 

DETAILS

• 1.00-carat Pear Diamond
• .92cttw Diamond Accents
• Material: 14-karat Yellow Gold
• Measurements: 8.4mm taper to 4.6mm

Our clients wanted to create matching wedding rings. The diamonds were removed from family heirlooms including their mother's original wedding ring. The negative space and two-tone colors create a unique and contemporary design. The diamonds were set low to prevent any snagging and gives a smooth setting.

DETAILS

• .15-carat round diamond
• .25cttw diamonds
• Material: 14-karat white and yellow gold
• Measurements: 6.5mm wide

Julie had inherited a large diamond from her mother and she wanted to redesign it along with a vintage diamond ring into one new modern and unique necklace. She also had pair of diamond studs that she wanted to give an updated look. Instead of collecting dust in the drawer, these diamonds can now be proudly worn everyday.

DESIGN NOTES

The pendant was handcrafted to create the flowing curves of the pendant. The diamond studs were removed and reset into dangle-style diamond earrings.

Lisa from Iowa had a couple of rings she wanted to combine into one fabulous right hand ring. She wanted something unique and did not look like a wedding ring.

DESIGN NOTES

The small diamonds were set into a custom interweave style band with the princess and round diamonds offset from each other.

DETAILS

• Material: 14k White Gold
• Main Stones: .50ct Princess-cut and .65ct Round Diamond
• Accents: .50cttw round diamonds

This modern multi-row diamond wedding band was handcrafted to fit one of our custom designed engagement rings. It is unique band that can be worn alone or with an engagement ring to give a complete look. 

DETAILS

• 14-karat white gold
• .25-cttw round brilliant cut diamonds

This custom wedding ring was created for Theresa who wanted something unique yet was comfortable to wear everyday. She works a lot with her hands and has a busy lifestyle, so she did not want the stones to sit up high or snag on anything. The angled rows gives this wedding ring a distinct and edgy look.

DETAILS

• .56-carat Princess cut diamond
• 3mm Genuine blue sapphires
• .10-cttw accent diamonds
• Material: 14-karat White Gold
• Measurements: 13mm taper to 5mm

Troy and Jennifer wanted to redesign her wedding ring while keeping some of the original integrity of her ring. They fell in love with an Ambrosia designed diamond ring. The two rings were custom designed into a spectacular new wedding ring.

DESIGN NOTES

Her main diamond and it's unique prongs were removed from the original ring and custom fit into the new ring design. The old wedding ring was restored to make into a simple diamond band. 

DETAILS

• Material: 14k white gold
• Main stone: Two .25ct trillion cut diamonds (appears like a marquise)
• Accents: 1.50cttw princess cut diamonds
• Measurements: 8.5mm width tapering to 4mm width at the bottom

Jet of Nebraska wanted to give her wedding ring an updated look while combining her other pieces of jewelry together. She wanted a wide, modern and artistic style of wedding ring. We added her four children's birthstones to complete her unique family ring.

DETAILS

• .70-carat Round Diamond
• 1.16cttw Diamonds
• Genuine Birthstones
• Material: 14-karat White and Yellow Gold
• Measurements: 10.3mm taper 3.5mm

Sarah wanted to custom design a unique wedding ring with the perfect amount of sparkle. This modern style ring features a princess cut diamond. The low profile and bar channel setting provides a comfortable setting.

DETAILS

• Main Stone: 1.00ct Princess-cut Diamond
• Accents: .27cttw diamonds
• Material: 14k White Gold
• Measurement: 8mm wide tapering to 5mm

Courtney always felt like her diamond didn’t stand out and needed to be showcased in a new wedding ring. The original wedding ring was a little bulky and it caused the diamond to get lost in the ring. Courntey also had issues with her second wedding ring with the side diamonds falling out from a faulty setting.

DESIGN NOTES

The new custom wedding ring was designed in a two-tone colored setting. The pink gold design creates an artistic and dramatic design weaving across the white gold band. Five colored gemstones were handset around the main diamond's basket for each of their children's birthstones. This custom wedding ring is truly stunning.

DETAILS

• 14-karat pink gold and white gold
• 3.00-carat Round brilliant cut diamond
• 5.00cttw diamonds
• Gemstones: Citrine, Blue Sapphire, Pink Tourmaline, Blue Zircon, Aquamarine

We create the most unique and truly one-of-a-kind custom jewelry. This modern pink tourmaline was hand cut by a National Award winning gemstone master. The angular shape of the pendant compliment the cuts of the gemstone.

DETAILS

• 1.42-carat Genuine Specialty-cut Pink Tourmaline
• .15cttw round brilliant cut diamonds
• 14-karat white gold setting
• 14-karat white gold Sparkling Singapore chain

This custom designed wedding ring is a true one-of-a-kind. The engagement ring and wedding band were handcrafted to slide into each other to create a contemporary appearance. The .80-carat trillion-cut diamond is set to float above the channel set diamond wedding band.

DETAILS

• 14-karat White Gold Setting
• .76-carat Trillion-cut Diamond
• 1.00-carat total weight

 We love to create unique and contemporary style mothers and family rings. This multirow ring adds a new twist to the traditional birthstone ring. Contact us to custom design your own family birthstone ring.

DETAILS

• 14-karat white gold
• .23ct round diamond
• Genuine birthstones (emerald, peridot, opal, alexandrite)

This custom designed wedding ring has a modern twist to the traditional style wedding ring. The baguette diamonds were removed from the older original wedding ring and reset into the new engagement ring. The princess-cut diamond gives the illusion of floating in the center of the ring. Her husband surprised her with a secret message engraved on the inside of the ring. 

DETAILS

• 14-karat White Gold
• 1.30-carat Princess-cut Diamond
• 1/3cttw diamonds

Jamie wanted to redesign her wedding ring into a fun, unique and modern design. The diamonds and blue sapphires were removed from her original wedding ring and reset into a multirow style ring. The diamonds and gemstones look completely different in the custom designed white gold setting.

DETAILS

• Material: 14-karat white gold
• .68-carat oval cut diamond
• .45cttw round and baguette cut diamonds
• Genuine tapered baguette blue sapphires
• Measurements: 9.75mm width tapering to 5.5mm width to the back

This custom designed ring is sure to make a statement. The genuine blue sapphire is mined from Montana and displays a range of deep blue, denim and grey hues. Gorgeous blue!

DETAILS

• 14-karat white gold setting
• Genuine .71ct Montana Blue Sapphire
• Genuine London Blue Topaz

Our client wanted to create a classic band to complement her Ambrosia custom engagement ring. The peach morganites match her morganite engagement ring beautifully. 

DETAILS

• Genuine Morganite Gemstones
• .40cttw Diamond Accents
• Material: 14-karat Rose Gold
• Measurements: 6mm tapering to 3mm

This custom wedding ring was designed from Helen's original wedding ring along with other family jewelry she inherited. The diamonds were removed and reset into a modern designed ring. She wanted something that was sparkly and had an unique look.

DETAILS

• 14-karat white gold
• .25-carat and .20-carat round diamonds in center
• 2.00cttw round diamonds

This stunning wedding ring was custom designed for our client. Andrew wanted to create a comfortable style with a bezel style of setting. The multirow bands swirl around the sparkling diamond. Click to watch the behind scenes video for this custom project.

DETAILS

• .74-carat Round Diamond
• .92cttw Diamonds
• Material: 14-karat White Gold
• Measurements: 9.4mm taper to 3.3mm

Our client wanted to upgrade her wedding ring. Her large diamond needed a spectacular setting to showcase it's beauty. The black and white diamonds add a nice contrast to this modern style ring.

DETAILS

• 3.54ct Round Diamond
• 1.14cttw round white and black diamonds
• Material: 14-karat White Gold
• Measurements: 7mm taper to 3.5mm

Reily surprised his wife with a special custom ring. The design was influenced by his wife's business logo. It is a low profile ring with a comfort fit for an extremely comfortable ring.

NOTES

The original jewelry was Reily's parent's wedding bands and his mom's diamond earrings. The back of the new ring was cut from his dad's original band and the top was casted from the gold from his mom's wedding band.

DETAILS

• Material: 14-karat Yellow Gold
• .20-carat round diamonds
• Measurements: 7.6mm wide

This engagement ring was custom designed for Ravi who wanted a unique, yet classic style of ring. The ring features a genuine salt and pepper diamond accented with sparkling diamonds.

DETAILS

• 1.26ct Pear-shaped Salt & Pepper Diamond (8x5mm)
• .50cttw diamond accents
• Material: 18-karat yellow gold
• Measurements: 14.7mm wide, halo band 2.8mm

Jared wanted to surprise his wife with a unique necklace with their family's birthstones. This handcrafted pendant showcases each gemstone, but you will notice these are not traditional birthstone colors seen in typical family jewelry. The top gemstone is a natural color-changing garnet for their son's birth-month of January, the middle stone is a teal colored diamond for Megan's birth-month of April and the last is a blue sapphire for Jared's birth-month of September. Megan now enjoys her very unique and contemporary designed Family necklace.

DESIGN NOTES

• The color-changing garnet is a reddish-purple in indoor lighting and changes to a greenish-purple when exposed to outdoor lighting. 

DETAILS

• Sterling Silver
• .06ct. Genuine Gemstones
• 16-18" Adjustable diamond-cut chain

Yellow diamonds are the biggest rave and this yellow citrine will add the pop of color you crave. The cushion-cut compliments the vintage swirl design on the ring's basket design. A simple, yet elegant ring.

DETAILS

• Genuine Golden Citrine (11x9mm)
• Genuine 6x4mm Garnet
• Genuine 3mm London Topaz
• Material: 10-karat Yellow Gold
• Measurement: 11mm taper 3mm

This custom pendant was designed for our client who wanted to focus on the beauty of this large pink sapphire. Matching pink sapphires were handset in the offset curved bail design.

DETAILS

• 14.39-carat Pink Sapphire *LAB
• Genuine Pink Sapphire accents
• Material: 14-karat Rose Gold
• Measurements: 24x12mm

Brenda of Iowa wanted to create a unique and special ring for her opal she had sitting in a drawer for years. She also fell in love with the rare color changing garnet Ambrosia had. After a few design sketches, together they had created the perfect ring with all of the little details Brenda dreamed of.

DETAILS

• 3.13-carat Genuine Opal
• .82-carat Pyrope Color-changing Garnet
• .44cttw round diamond accents
• Material: 14-karat Rose Gold
• Measurements: 18mm taper to 2.5mm

This engagement ring tapers towards the center to help draw your attention to the main brilliant diamond. It is a comfortable setting as the shoulders of the ring hugs the center diamond. This is a unique ring with lots of sparkle. 

DETAILS

• 14-karat white gold
• .33ct Round Diamond
• .71cttw diamonds

This custom wedding ring was designed for Brianna of Orange City, IA. She loves vintage jewelry with filigree details. 

DESIGN NOTES

The engagement ring was created with a floral shaped halo with small accent diamonds. The wedding band was handcrafted with a beaded band to compliment the engagement ring filigree design.

DETAILS

• Material: 10k Rose Gold
• Main Stone: .50ct Oval Diamond
• Accents: .12cttw round diamonds

Kevin and Christina of Nevada wanted to update her wedding ring for their anniversary. She used the diamonds from her original ring along with the stones from a ring she was given for a previous anniversary. This custom design ring adds a unique twist to the traditional halo ring.

DETAILS

• 9x7mm Genuine Swiss Blue Topaz
• .50cttw round diamond accents
• Material: 14-karat White Gold
• Measurements: 13mm width, 2mm shank

Deb inherited her father's yellow gold wedding band and her mother's diamond wedding ring. She wanted to redesign them together as one ring.

DESIGN DETAILS

The diamonds were removed from the original wedding ring and the original white gold mounting was recycled for the new casting. The new design overlaps Deb's father's original wedding band.

DETAILS

• 14-karat White and Yellow Gold
• Approximately 1.80cttw

Anna wanted to redesign this wedding ring into a diamond necklace. She loved the teardrop shape and the diamonds were arranged perfectly for this custom designed pendant.

DESIGN NOTES

All of the diamonds were removed from the engagement ring and wedding band. The main round diamond was set in the center and the remaining diamonds were reset into the teardrop shape.

DETAILS

• 14-karat white gold setting
• Round brilliant cut diamonds

This stunning engagement ring adds a unique twist to the traditional ring. The open twist band features sparkling marquise diamonds drawing your attention to a pear teardrop diamond.

 DETAILS

• .56-carat Genuine Pear Diamond
• 1.00cttw diamonds
• Material: 14-karat White Gold

This custom engagement ring was custom designed for a special couple of Nebraska. She wanted the ring to be filled with lots of details and diamond accents seen from every angle. A couple of ruby gemstones were set on the bottom shank of the ring representing each member of the family. This handcrafted ring is a spectacular masterpiece.

DETAILS

• 2.50-carat pear cut diamond
• 1.24cttw round diamond accents
• Genuine round rubies
• Material: 14-karat white gold

This custom engagement ring was custom designed for a special couple of Nebraska. Sierra wanted the ring to be filled with lots of details and diamond accents seen from every angle. A couple of ruby gemstones were set on the bottom shank of the ring representing each member of the family. This handcrafted ring is a spectacular masterpiece.

DETAILS

• 2.50-carat pear cut diamond
• .75cttw round diamond accents
• Genuine round rubies
• Material: 14-karat white gold

Here at Ambrosia, we are known for creating unique engagement rings. This simple diamond ring features a pear-shaped diamond and accented with staggered diamonds.

DETAILS

• 14-karat yellow gold
• .40-carat pear-shaped diamond
• Measurements: 6.42x3.91x2.60mm
• .10-carat round accent diamonds

This custom designed engagement ring gives a unique twist on the traditional ring. It features a pear shaped diamond and accented with round brilliant cut diamonds. The ring is a comfortable and durable design as the main diamond is smoothly set into a half bezel design.

DETAILS

• 14-karat White Gold
• .61-carat Pear-shaped Diamond
• .15cttw Round Diamonds

Our classic twist diamond band can be combined with any shape of diamond with or without a halo. Tim custom designed this engagement ring with his and his future bride's birthstones. These little birthstones are set under the main diamond in the gallery.

DETAILS

• .31-carat pear shape diamond
• .40cttw accent diamonds
• 14-karat rose gold setting

This custom designed engagement ring features a large pear-shaped diamond accented with marquise diamonds. A hidden halo of diamonds wraps around the main pear diamond for extra sparkle. Under the main diamond, the couple's initials were engraved into the gallery. The matching wedding band is accented with marquise diamonds creating the perfect crown design. 

 DETAILS

• 2.04-carat Pear Diamond
• 1.08cttw accent diamonds
• Material: 14-karat White Gold
• Measurements: 13mm wide tapering to 3mm

This custom engagement ring is currently in the making. This two-tone diamond engagement ring is truly breathtaking. The 1.70-carat emerald cut diamond is showcased to provide the most amount of sparkle. The white and pink gold compliment each other perfectly and glitters with diamonds from every direction. 

DETAILS

• 14-karat White and Pink Gold
• 1.70-carat Emerald-cut Diamond
• .64cttw round brilliant-cut diamonds

Ambrosia enjoys finding the most unique, rare and stunning gemstones mined from around the world. Kunzite is known for its bright pink color with a splash of violet purple. Most kunzite is mined in San Diego Country, California. The crown basket accented with diamonds was designed to showcase this remarkable gemstone.

DETAILS

• Genuine 8.21-carat Kunzite (12x10.6x9.27mm)
• .30cttw Diamond Accents
• Material: 14-karat Rose and White Gold

Brad wanted to custom design a simple, yet elegant engagement ring for his future bride. The princess cut diamond really pops in this custom designed engagement ring. A couple baguette diamonds on the sides adds a touch of sparkle. The detailed swirl design along the gallery adds a personal touch.

DETAILS

• Material: 14-karat white gold
• Main Stone: .80-carat Princess Cut
• .10cttw baguette diamonds
• Quality: Color G-I, Clarity SI1
• Measurements: 2mm width band

Sheri wanted to redesign a couple of her diamond rings into two special necklaces for her daughters. The diamonds were removed and reset in the unique custom designed pendants.

DETAILS

• Princess and Marquise Genuine Diamonds
• Material: 14-karat White Gold

Tim from Minnesota wanted to surprise his girlfriend Kim with a beautiful handcrafted engagement ring. The square princess cut diamond draws in your attention from curved infinity design of the setting. Then we added a few round diamonds for a little extra sparkle.

To read Tim's romantic proposal story to his fiancé Kim, Click here

DETAILS

• 14-karat white gold
• .55-carat princess cut diamond
• .20cttw round diamond accents

 This custom wedding ring set was designed with the Husband and Wife's birthstones. Her birthstone is diamond and his birthstone is garnet. Rhodolite garnets reflect beautiful raspberry colors.   

DETAILS

• 14-karat White Gold
• .55-carat Princess-cut Diamond
• 3mm and 2mm Rhodolite Garnets
• .60cttw Princess-cut Diamonds

We love setting princess cut diamonds into a ballpark kite shaped setting. This unique setting grabs everyone's attention while creating a bigger illusion. This custom made engagement ring was created with a dainty band to make the diamonds pop. Simple yet elegant.

DETAILS

• .75ct Princess-cut Diamond
• .10cttw Accent Diamonds
• Material: 14k Yellow Gold
• Measurements: 1.7mm width

Linda wanted to redesign several diamond rings into one stunning wedding ring. She was looking to add personal touches to the traditional halo style ring. Ambrosia created a stunning look with a princess-cut diamond halo around the main princess-cut to create a bigger appearance. This masterpiece has detailed engraving from every angle. 

DESIGN NOTES

The diamonds were removed from the three original rings and hand set into the new ring mounting. New princess cut diamonds were added to create the halo design. These custom wedding rings were custom designed to compliment each other.

DETAILS

• 14-karat yellow and white gold
• 4.60cttw Diamonds

Our client loves princess cut diamond engagement rings, but wanted to add a unique twist to the design. The pave set diamonds weave around the white gold band creating a contemporary feel.

DETAILS

• Material: 14-karat white gold
• Main Stone: 1.00-carat Princess-cut Diamond
• Accents: .10cttw round diamonds
• Quality: Color G-H / SI
• Measurements: 7mm wide

DETAILS

• 18-karat rose gold
• 4.05-carat Genuine Purple Sapphire
• 4mm Genuine Orange Sapphires
• Genuine Blue Sapphire and Ruby Accents
• Value: $12,500